Accessories

Need any replacements or upgrade parts for your kit? For a more detailed exploded parts diagram - Click Here

Filters

Filters

Filter Options

Price

£0.00 - £9.9958item
£10.00 - £19.991 item
£20.00 - £29.9913item
£30.00 - £39.991 item
£40.00 and above1 item

Click here for ASP (Adjustable Spring Platform) options

View as Grid List

Items 25-48 of 74

Sort By Set Descending Direction

BC Damper Boot Front McPherson To Suit M20/M22 Damper Shaft 120L

0007175

£8.39 £6.99

BC Damper Boot RM Series To suit M20/M22 Damper Shaft

0007176

£8.39 £6.99

BC DAMPER ADJUSTER KNOB M10

0007232

£7.34 £6.12

BC BR Coilover Extender 20cm Pair

0007275

£26.24 £21.87

BC BR Upper Spring Platform with Bearing M12

0007307

£24.14 £20.12

BC Bump Stops 20mm ID - Single

0007391

£8.39 £6.99

BC Top Mount Stud M8 x 1.25 31mm Overall Length

0007446

£2.09 £1.74

BC Damper Boot McPherson To Suit M20/M22 Damper Shaft 150mm Overall Length

0007462

£8.39 £6.99

BC TOP MOUNT STUD NUT M8 X 1.25

0004575

£2.09 £1.74

BC Top Mount Stud M10 x 1.25 34mm Overall Length

0004828

£2.09 £1.74

BC TOP MOUNT CENTRAL NUT M12 X 1.25 22MM OVERALL LENGTH

0004955

£5.24 £4.37

BC BR DAMPER ADJUSTER KNOB M14

0008037

£7.34 £6.12

BC Bump Stop 12.5mm ID 35mm L - Single

0008131

£8.39 £6.99

BC STAINLESS CAMBER BOLTS 18MM THREAD LENGTH

0008476

£0.53 £0.44

BC TOP MOUNT STUD NUT M10X1.25

0008488

£2.09 £1.74

BC NYLOC NUT M10 X 1.25 10MM OVERALL LENGTH INVERTED DAMPER

0008513

£5.24 £4.37

BC Coilover Side Adjuster Extender 25cm Long Pair

0008675

£26.24 £21.87

BC BR LOCKING COLLAR M44 REAR DAMPER

0008757

£8.39 £6.99

BC BR Coilover Extender 48cm Pair

0008948

£26.24 £21.87

BC C-SPANNER SMALLEST SINGLE M44

0008981

£7.34 £6.12

BC M44 Damper Boot A-Arm To Suit M12/M12.5 Damper Shaft

0027078

£8.39 £6.99

BC Bump Stops 22mm ID - Single

0040034

£8.39 £6.99

BC TOP MOUNT CENTRAL NUT M14 X 1.5 25MM OVERALL LENGTH

0031381

£5.24 £4.37

BC V1 M44 LOWER COILOVER LOCKING COLLAR RED

0022775

£8.39 £6.99

Page

Page Previous
Page 1
You're currently reading page 2
Page 3
Page 4
Page Next

Show

per page

open

True Rear Coilovers

This true rear coilover option requires shell reinforcement prior to coilover install. Please tick to confirm you understand the conditions of use.

I agree to the true rear coilover terms and conditions

open

Noise Transmission

We have had a small number of instances where the pillowball top mounts cause noise transmission on this specific application. If the potential noise could be an issue for you, we advise purchasing the ‘recommended kit’ at the top of this page instead. The recommended BR-RN kit will not come with any top mounts as it is designed specifically to re-use the OEM top mount components.

We have had a small number of instances where the pillowball top mounts cause noise transmission on this specific application. If the potential noise could be an issue for you, we advise purchasing the ‘recommended kit’ at the top of this page instead. The recommended BR-RS kit will come with non camber adjustable rubber top mounts which will eradicate the issue.

In a very small number of applications the RA front solid pillowball suspension top mounts can transmit noise into the cabin. It is very rare and is application specific. Customer can expect noise transmission on this application. The noise is not indicative of a fault with the product, its the nature of a solid pillowball top mount and the nuances of a very small number of car shells that combine to generate noise transmission. The noise is in the form of light knocking. As noise transmission is a function of the pillowball and shell combination and you accept that noise might be present we will not accept returns of any of these kits as faulty due noise transmission. This does not effect the kits general warranty, only that pillowball noise transmission is not a warranty issue. We will not accept kit returns due to noise transmission.

I agree to the noise transmission terms and conditions

open

Attention

Additional plug-in error delete kit may be necessary. Please note that this is not available for purchase through BC Racing.

I agree to the terms and conditions

open

The RM, HM and ZR Series are comprised of a damper cartridge secured within a threaded outer body. This specific design requires a lubricating grease to be applied during the assembly process between the two damper and threaded body to avoid metal to metal contact. In order to keep the two components from touching each other and so generating noise transmission you will need to periodically clean out the old grease and apply new grease.

This is a simple process that can be done with just a few common tools. It does not require you to open the internals of the dampers themselves and therefore you do not need to have the dampers re-pressurised after carrying out this procedure. Please contact us on [email protected] for more information and a step-by-step guide on how to complete this maintenance.

As a result of this required maintenance, we do not recommend the RM, HM or ZR Series for road use over the BR Series or ER Series.

open

Notice

PLEASE NOTE THIS COILOVER KIT WILL ONLY FIT THE WIDE ARCH E82 1M COUPE WITH THE 3.0 STRAIGHT 6 TURBO ENGINE.

IF YOU DO NOT HAVE THIS MODEL THEN PLEASE REFER TO THE MENU OPTION ‘BMW 1 SERIES E81/E87 EXCL 1M COUPE

I understand

open

Attention

Before you can continue, you must agree to all of following terms

This true rear coilover option requires shell reinforcement prior to coilover install. Please tick to confirm you understand the conditions of use.

I agree to the true rear coilover terms and conditions

I agree to the noise transmission terms and conditions

We have had a small number of instances where the pillowball top mounts cause noise transmission on this specific application. If the potential noise could be an issue for you, we advise purchasing the ‘recommended kit’ at the top of this page instead. The recommended BR-RS kit will come with non camber adjustable rubber top mounts which will eradicate the issue.

I agree to the noise transmission terms and conditions

In a very small number of applications the RH front solid pillowball suspension top mounts can transmit noise into the cabin. It is very rare and is application specific. Customer can expect noise transmission on this application. The noise is not indicative of a fault with the product, its the nature of a solid pillowball top mount and the nuances of a very small number of car shells that combine to generate noise transmission. The noise is in the form of light knocking. As noise transmission is a function of the pillowball and shell combination and you accept that noise might be present we will not accept returns of any of these kits as faulty due noise transmission. This does not effect the kits general warranty, only that pillowball noise transmission is not a warranty issue. We will not accept kit returns due to noise transmission.

I agree to the noise transmission terms and conditions

We have had a small number of instances where the pillowball top mounts may cause noise transmission on this specific application. If potential noise could be a concern for you, please be aware of this before proceeding.

Please also note that there is currently no known solution or alternative for this application, and the RA kit with pillowball top mounts is the only available option.

I agree to the noise transmission terms and conditions

In a very small number of applications the RA front solid pillowball suspension top mounts can transmit noise into the cabin. It is very rare and is application specific. Customer can expect noise transmission on the 996 and 986 kits. The noise is not indicative of a fault with the product, its the nature of a solid pillowball top mount and the nuances of a very small number of car shells that combine to generate noise transmission. The noise is in the form of light knocking. As noise transmission is a function of the pillowball and shell combination and you accept that noise might be present we will not accept returns of any 996 or 986 kits as faulty due noise transmission. This does not affect the kits general warranty, only that pillowball noise transmission is not a warranty issue. We will not accept kit returns due to noise transmission.

I agree to the noise transmission terms and conditions

For transporter T6 panel van FWD long wheelbase.
Not for vehicles with 500+KG load in rear

I understand

AIRMATIC MUST CHANGE REAR LOWER ARM

Rear arm needs replacing with the Mercedes rear lower control arm from the E350 W211.

I understand

Additional plug-in error delete kit may be necessary. Please note that this is not available for purchase through BC Racing.

I agree to the terms and conditions

As a result of this required maintenance, we do not recommend the RM, HM or ZR Series for road use over the BR Series or ER Series.

I agree to the terms and conditions

This RA/DA kit is designed for performance-focused builds and requires minor chassis modification, including cutting the front upper mounting area to ensure proper fitment.

Please contact us at [email protected] to receive full installation instructions. We strongly recommend reviewing this document before purchasing to ensure it meets your requirements.

If you prefer a direct bolt-on option, please choose the RN/DN version, which is engineered to work with OEM front upper mounts for easier installation.

I agree to the terms and conditions