We have had a small number of instances where the pillowball top mounts cause noise transmission on this specific application. If the potential noise could be an issue for you, we advise purchasing the ‘recommended kit’ at the top of this page instead. The recommended BR-RN kit will not come with any top mounts as it is designed specifically to re-use the OEM top mount components.

We have had a small number of instances where the pillowball top mounts cause noise transmission on this specific application. If the potential noise could be an issue for you, we advise purchasing the ‘recommended kit’ at the top of this page instead. The recommended BR-RS kit will come with non camber adjustable rubber top mounts which will eradicate the issue.

In a very small number of applications the RA front solid pillowball suspension top mounts can transmit noise into the cabin. It is very rare and is application specific. Customer can expect noise transmission on this application. The noise is not indicative of a fault with the product, its the nature of a solid pillowball top mount and the nuances of a very small number of car shells that combine to generate noise transmission. The noise is in the form of light knocking. As noise transmission is a function of the pillowball and shell combination and you accept that noise might be present we will not accept returns of any of these kits as faulty due noise transmission. This does not effect the kits general warranty, only that pillowball noise transmission is not a warranty issue. We will not accept kit returns due to noise transmission.

I agree to the noise transmission terms and conditions

open

Attention

Additional plug-in error delete kit may be necessary. Please note that this is not available for purchase through BC Racing.

I agree to the terms and conditions

open

The RM, HM and ZR Series are comprised of a damper cartridge secured within a threaded outer body. This specific design requires a lubricating grease to be applied during the assembly process between the two damper and threaded body to avoid metal to metal contact. In order to keep the two components from touching each other and so generating noise transmission you will need to periodically clean out the old grease and apply new grease.

This is a simple process that can be done with just a few common tools. It does not require you to open the internals of the dampers themselves and therefore you do not need to have the dampers re-pressurised after carrying out this procedure. Please contact us on [email protected] for more information and a step-by-step guide on how to complete this maintenance.

As a result of this required maintenance, we do not recommend the RM, HM or ZR Series for road use over the BR Series or ER Series.

open

Notice

PLEASE NOTE THIS COILOVER KIT WILL ONLY FIT THE WIDE ARCH E82 1M COUPE WITH THE 3.0 STRAIGHT 6 TURBO ENGINE.

IF YOU DO NOT HAVE THIS MODEL THEN PLEASE REFER TO THE MENU OPTION ‘BMW 1 SERIES E81/E87 EXCL 1M COUPE

I understand

open

Attention

Before you can continue, you must agree to all of following terms

This true rear coilover option requires shell reinforcement prior to coilover install. Please tick to confirm you understand the conditions of use.

I agree to the true rear coilover terms and conditions

I agree to the noise transmission terms and conditions

We have had a small number of instances where the pillowball top mounts cause noise transmission on this specific application. If the potential noise could be an issue for you, we advise purchasing the ‘recommended kit’ at the top of this page instead. The recommended BR-RS kit will come with non camber adjustable rubber top mounts which will eradicate the issue.

I agree to the noise transmission terms and conditions

In a very small number of applications the RA front solid pillowball suspension top mounts can transmit noise into the cabin. It is very rare and is application specific. Customer can expect noise transmission on the 996 and 986 kits. The noise is not indicative of a fault with the product, its the nature of a solid pillowball top mount and the nuances of a very small number of car shells that combine to generate noise transmission. The noise is in the form of light knocking. As noise transmission is a function of the pillowball and shell combination and you accept that noise might be present we will not accept returns of any 996 or 986 kits as faulty due noise transmission. This does not affect the kits general warranty, only that pillowball noise transmission is not a warranty issue. We will not accept kit returns due to noise transmission.

I agree to the noise transmission terms and conditions

For transporter T6 panel van FWD long wheelbase.
Not for vehicles with 500+KG load in rear

I understand

AIRMATIC MUST CHANGE REAR LOWER ARM

Rear arm needs replacing with the Mercedes rear lower control arm from the E350 W211.

I understand

Additional plug-in error delete kit may be necessary. Please note that this is not available for purchase through BC Racing.

I agree to the terms and conditions

As a result of this required maintenance, we do not recommend the RM, HM or ZR Series for road use over the BR Series or ER Series.

I agree to the terms and conditions

Filters

Now Shopping by

Category VOLKSWAGEN GOLF Remove

Clear All

Filter Options

Category

MK8 (54.5MM) FWD4item
VOLKSWAGEN GOLF MK1 (74-83)10item
VOLKSWAGEN GOLF MK1 CABRIOLET (79-93)5item
VOLKSWAGEN GOLF MK2 / MK3 (&JETTA) (83-99)17item
VOLKSWAGEN GOLF MK3/MK3.5 CABRIOLET (92-02)2item
VOLKSWAGEN GOLF MK4 2WD (& JETTA) (99-05)18item
VOLKSWAGEN GOLF MK4 INC R32 & JETTA AWD (99-05)16item
VOLKSWAGEN GOLF MK5 1.6 (STRUT 49.5) (05-09)8item
VOLKSWAGEN GOLF MK5 GTI TDI R32 (STRUT 54.5) (05-09)33item
VOLKSWAGEN GOLF MK6 (STRUT 49.5) (08-13)1 item
VOLKSWAGEN GOLF MK6 (STRUT 54.5) (08-13)4item
VOLKSWAGEN GOLF MK6 R (W/O DCC) (10-12)6item
VOLKSWAGEN GOLF MK7 (STRUT 49.5) (13-20)8item
VOLKSWAGEN GOLF MK7 (STRUT 54.5) (13-20)31item
VOLKSWAGEN GOLF MK8 (49.5MM) (20+)5item
VOLKSWAGEN GOLF MK8 VARIANT (STRUT 49.5) FWD 20+4item
VOLKSWAGEN GOLF MK8 VARIANT AWD (54.5MM) (20+)6item
VOLKSWAGEN GOLF MK7 VARIANT FWD (STRUT 49.5) (13-19)6item
VOLKSWAGEN GOLF MK7 VARIANT FWD (STRUT 54.5) (13-19)7item
VOLKSWAGEN GOLF MK6 ESTATE (STRUT 49.5)1 item
VOLKSWAGEN GOLF MK6 ESTATE (STRUT 54.5)1 item
VOLKSWAGEN GOLF MK5 ESTATE (STRUT 49.5)1 item
VOLKSWAGEN GOLF MK5 ESTATE (STRUT 54.5)1 item
VOLKSWAGEN GOLF MK8 VARIANT (STRUT 54.5) FWD 20+2item
VOLKSWAGEN GOLF MK8 AWD (54.5MM) (20+)2item
VOLKSWAGEN GOLF MK5 GTI TDI R32 (STRUT 54.5) (05-09) (REAR INTEGRATED)1 item
VOLKSWAGEN GOLF MK6 (STRUT 54.5) (08-13) (REAR INTEGRATED)1 item
MK7/A7 (STRUT 54.5MM) (Rear Integrated) FWD (13-19)2item
VW GOLF V (STRUT 49.5MM) (Rear Integrated) FWD MK5/V5 (05-09)2item
VW GOLF VI (STRUT 49.5MM) (Rear Integrated) FWD MK6/V6 (08-11)2item
VW GOLF R (W/O DCC) (Rear Integrated) AWD 0 (10-14)2item
VW GOLF VIII (STRUT 54.5MM) (Rear Integrated) AWD MK8 (20+) 7/4.5kg.mm1 item
VW GOLF VIII (STRUT 49.5MM) (Rear Integrated) FWD MK8 (20+)1 item
VW GOLF VIII (STRUT 54.5MM) (Rear Integrated) FWD MK8 (20+)1 item
VW GOLF VII (STRUT 49.5MM) (Rear Integrated) FWD MK7/A7 (13-19)1 item

Click here for ASP (Adjustable Spring Platform) options

Compare Products

Remove This Item

Compare

Clear All

You have no items to compare.

My Wish List

Last Added Items

Add to Cart

Remove This Item

Go to Wish List

You have no items in your wish list.