We have had a small number of instances where the pillowball top mounts cause noise transmission on this specific application. If the potential noise could be an issue for you, we advise purchasing the ‘recommended kit’ at the top of this page instead. The recommended BR-RN kit will not come with any top mounts as it is designed specifically to re-use the OEM top mount components.

We have had a small number of instances where the pillowball top mounts cause noise transmission on this specific application. If the potential noise could be an issue for you, we advise purchasing the ‘recommended kit’ at the top of this page instead. The recommended BR-RS kit will come with non camber adjustable rubber top mounts which will eradicate the issue.

In a very small number of applications the RA front solid pillowball suspension top mounts can transmit noise into the cabin. It is very rare and is application specific. Customer can expect noise transmission on this application. The noise is not indicative of a fault with the product, its the nature of a solid pillowball top mount and the nuances of a very small number of car shells that combine to generate noise transmission. The noise is in the form of light knocking. As noise transmission is a function of the pillowball and shell combination and you accept that noise might be present we will not accept returns of any of these kits as faulty due noise transmission. This does not effect the kits general warranty, only that pillowball noise transmission is not a warranty issue. We will not accept kit returns due to noise transmission.

I agree to the noise transmission terms and conditions

open

Attention

Additional plug-in error delete kit may be necessary. Please note that this is not available for purchase through BC Racing.

I agree to the terms and conditions

open

The RM, HM and ZR Series are comprised of a damper cartridge secured within a threaded outer body. This specific design requires a lubricating grease to be applied during the assembly process between the two damper and threaded body to avoid metal to metal contact. In order to keep the two components from touching each other and so generating noise transmission you will need to periodically clean out the old grease and apply new grease.

This is a simple process that can be done with just a few common tools. It does not require you to open the internals of the dampers themselves and therefore you do not need to have the dampers re-pressurised after carrying out this procedure. Please contact us on [email protected] for more information and a step-by-step guide on how to complete this maintenance.

As a result of this required maintenance, we do not recommend the RM, HM or ZR Series for road use over the BR Series or ER Series.

open

Notice

PLEASE NOTE THIS COILOVER KIT WILL ONLY FIT THE WIDE ARCH E82 1M COUPE WITH THE 3.0 STRAIGHT 6 TURBO ENGINE.

IF YOU DO NOT HAVE THIS MODEL THEN PLEASE REFER TO THE MENU OPTION ‘BMW 1 SERIES E81/E87 EXCL 1M COUPE

I understand

open

Attention

Before you can continue, you must agree to all of following terms

This true rear coilover option requires shell reinforcement prior to coilover install. Please tick to confirm you understand the conditions of use.

I agree to the true rear coilover terms and conditions

I agree to the noise transmission terms and conditions

We have had a small number of instances where the pillowball top mounts cause noise transmission on this specific application. If the potential noise could be an issue for you, we advise purchasing the ‘recommended kit’ at the top of this page instead. The recommended BR-RS kit will come with non camber adjustable rubber top mounts which will eradicate the issue.

I agree to the noise transmission terms and conditions

In a very small number of applications the RA front solid pillowball suspension top mounts can transmit noise into the cabin. It is very rare and is application specific. Customer can expect noise transmission on the 996 and 986 kits. The noise is not indicative of a fault with the product, its the nature of a solid pillowball top mount and the nuances of a very small number of car shells that combine to generate noise transmission. The noise is in the form of light knocking. As noise transmission is a function of the pillowball and shell combination and you accept that noise might be present we will not accept returns of any 996 or 986 kits as faulty due noise transmission. This does not affect the kits general warranty, only that pillowball noise transmission is not a warranty issue. We will not accept kit returns due to noise transmission.

I agree to the noise transmission terms and conditions

For transporter T6 panel van FWD long wheelbase.
Not for vehicles with 500+KG load in rear

I understand

AIRMATIC MUST CHANGE REAR LOWER ARM

Rear arm needs replacing with the Mercedes rear lower control arm from the E350 W211.

I understand

Additional plug-in error delete kit may be necessary. Please note that this is not available for purchase through BC Racing.

I agree to the terms and conditions

As a result of this required maintenance, we do not recommend the RM, HM or ZR Series for road use over the BR Series or ER Series.

I agree to the terms and conditions

Filters

Filter Options

Category

Vehicle Search5902item
Springs410item
Merchandise3item
Accessories76item
Homepage Featured716item

Shape

Barrel94item
Helper1 item
Straight165item
Taper149item

Spring rate

0.5kg/mm1 item
2kg/mm3item
2.7kg/mm2item
3kg/mm17item
3.3kg/mm1 item
3.4kg/mm1 item
3.5kg/mm8item
3.6kg/mm1 item
4kg/mm30item
4.3kg/mm2item
4.5kg/mm13item
5kg/mm36item
5.5kg/mm14item
6kg/mm54item
6.5kg/mm5item
6.8kg/mm1 item
7kg/mm31item
7.5kg/mm1 item
8kg/mm40item
8.2kg/mm1 item
8.5kg/mm1 item
9kg/mm15item
10kg/mm33item
11kg/mm12item
12kg/mm27item
13kg/mm4item
14kg/mm17item
15kg/mm5item
16kg/mm9item
17kg/mm1 item
17.5kg/mm1 item
18kg/mm6item
20kg/mm5item
22kg/mm2item
24kg/mm5item
3.2kg/mm3item
2.5kg/mm1 item

Length

48mm1 item
100mm1 item
120mm13item
125mm2item
130mm6item
135mm4item
140mm11item
145mm7item
150mm21item
153mm1 item
155mm7item
160mm24item
165mm6item
170mm29item
175mm4item
180mm55item
185mm8item
190mm24item
195mm3item
200mm44item
205mm5item
210mm22item
215mm5item
220mm37item
225mm4item
230mm22item
235mm7item
240mm9item
245mm5item
250mm13item
255mm2item
258mm1 item
260mm5item
275mm1 item

Click here for ASP (Adjustable Spring Platform) options

Compare Products

Remove This Item

Compare

Clear All

You have no items to compare.

My Wish List

Last Added Items

Add to Cart

Remove This Item

Go to Wish List

You have no items in your wish list.